Electric Power Steering Controller

Simtek UK's BodyLogic EPAS controller is a clever little emulator unit developed for motorsport use. This unit allows you to vary the assistance given by your power assisted steering column.

The unit allows for the adjustment of sensitivity using a neat control potentiometer. Simply mount the control pot, plug in the unit and away you go!

• Vauxhall
  • Corsa B & C
  • Agila
• Suzuki
  • Swift
  • Alto
  • Other Suzuki variants
• Renault
  • Clio
• Honda
  • Civic (Rack mounted motor type)

This motorsport control unit incorporates connectors to make the unit plug and play which allows for quick replacement if ever required.

Also available from Simtek Vauxhall Corsa power steering ECU power supply connector

EPAS-A (Advanced unit)

As per EPAS-S with the addition of wheel speed input.

The advanced unit as with the standard unit emulates Engine RPM and road speed but with the addition of a wheel speed input.

The adjuster pot allows you to offset the assistance weight in relation to the road speed.

• Vauxhall
  • Corsa B & C
  • Agila
• Suzuki
  • Swift
  • Alto
  • Other Suzuki variants
• Renault
  • Clio
• Honda
  • Civic (Rack mounted motor type)

EPAS-D (Data compatible)

The data compatible unit can be controlled by and control CAN and LIN compatible systems It can reserve data from CAN or LIN and output analogue signals to control EPAS units as above. All functions are covered with Data or analogue adjustment input available.

The unit can also receive analogue signals and control CAN or LIN enabled EPAS systems.

EPAS-D is supplied with an adjuster pot for assistance adjust, but this can be dispensed with if the assistance adjust is transmitted via CAN or LIN.

The EPAS-D currently covers the following.

• Vauxhall
  • Corsa D
• Ford
  • Fiesta
  • Focus
  • Mondeo

EPAS A and EPAS D are available to custom format where specific configuration or CAN or LIN protocols are required.

Please ask for details.