The Simtek UK BodyLogic DashDapter 3 range was conceived to integrate vehicle electronic control signals from one format to another whilst at the same time expanding or modifying control functions in that system.
The DashDapter 3 range allows some or all the following inputs for conversions from and to output types depending on the model:
- 1 x Hi side Control input (Ignition “Active”)
- Up to 6 x Analog (0-5 Volts)
- 2 x Resistance inputs (NTC or resistive sensors)
- Up to 10 x Digital - (High side inputs)
- Up to 6 x Digital – (Low side inputs)
- 2 x PWM inputs
- 1 x Sine or Hall Speed input
- 2 x Hall Speed inputs
- 4 x CAN Channels
- 2 x LIN Channels
Output types
- 4 x CAN Channels
- 2 x LIN Channels
- 2 x digital pots (0 – 10K ohm)
- 8 x 3 Amp protected Low side drives.
- 5 x 3 Amp protected Low side drives
The unit can be offered with 3 options for connection provision:
- Plug kit for unit
- Plug kit for unit, fitted with 1 metre wire tails
- Plug and play sub harness - we would require details from you about your engine harness.
NB The prices of these connectivity kits are separate from the unit cost.
_______________________________________________________________________________
-
The DD3S - Basic control unit with Customer adjustable setup – (Primarily for Land Rover Defender vehicles)
The DD3S unit can be offered with 3 options of connectivity:
- Plug kit for unit (DD3SPK)
- Plug kit for unit, fitted with 1 metre wire tails (DD3SPTK)
- Plug and play sub harness - we would require details from you about your engine harness. (DD3SPPSH)
NB The prices of these connectivity kits are separate from the unit cost.
£379.00 exc VAT
(£454.80 inc VAT) -
The DD3E -Basic control unit with Customer adjustable setup – (with additional CAN channel and 4 x Analog channels available and 2 x PWM measurement inputs).
The DD3E unit can be offered with 3 options of connectivity:
- Plug kit for unit (DD3EPK)
- Plug kit for unit, fitted with 1 metre wire tails (DD3EPTK)
- Plug and play sub harness - we would require details from you about your engine harness. (DD3EPPSH)
NB The prices of these connectivity kits are separate from the unit cost.
£480.00 exc VAT
(£576.00 inc VAT) -
The DD3C - Fully populated unit with all functions available – (this unit has a comprehensive UI but does require Simtek to configure the main functions before delivery).
The DD3C unit can be offered with 3 options of connectivity:
- Plug kit for unit (DD3CPK)
- Plug kit for unit, fitted with 1 metre wire tails (DD3CPTK)
- Plug and play sub harness - we would require details from you about your engine harness. (DD3CPPSH)
NB The prices of these connectivity kits are separate from the unit cost.
£695.00 exc VAT
(£834.00 inc VAT) -
Plug Kit for DD3 range
Select your model
Model options: £43.50 exc VAT
(£52.20 inc VAT) -
DashDapter 3 Plug kit with 1 metre wiretails
DD3 Plug Kit with tails: £85.00 exc VAT
(£102.00 inc VAT) -
DashDapter 3 Plug and Play sub harness
We will require some information about your engine harness to supply this made correctly for your application. Therefore, due to possible variations in connectors needed we will provide a quotation for this item. Prices start at £220 + VAT.
DD3 P&P sub loom: £220.00 exc VAT
(£264.00 inc VAT) -
Remote support package for cusomisation and installation of DD3C
This is a bespoke package and covers of support via email or telephone and/or mods to your DD3C package to suit your custom requirements.
Contact Us For Details
